WPZ CS1 AK Caliber Designation Baseplate

WPZ CS1 Base Plate for MagPul AK 7.62 x 39 Gen 2/3 Magazines is a complete magazine base plate replacement with a little extra flair. 

What's in the box: 

Your CS1 Baseplate...duh. 
A tool thingy to help you get it off, if you want to, but why ? WHY? Leave it on!

Instructions:

1. Empty magazine of all rounds
2. Flip the magazine upside down
3. Press down on the base plate (oblong grey part in center) in the magazine.
4. While holding the base plate depressed, slide the OEM base plate off SLOWLY while keeping your thumb over the opening.
   1. Not doing this slowly while keeping your thumb over the opening may result in the spring and floor plate in the magazine launching at your face. Not our idea of a good time or experience.
5. After you've slid the OEM base plate off and avoided the spring launching at you. Push the OEM spring and floor plate back into the magazine and keep it depressed below the opening.
6. Take your CS1, properly orient it to the slots and slide it on until you hear it snap in. 
7. Check for secure fit by trying to move the plate by pushing it back off the magazine slot with some force. You may hear it and see it move back about 1mm, this is normal.  

This is an baseplate only. The kit does not include a magazine.