WPZ AR-15 MagHook G2 - Unibody (2 pack)

WPZ Mag Hook for MagPul AR-15 Gen 2 Magazines. Featuring a finger hook to ensure proper haptic orientation, quick acquisition and more secure grip when changing mags. 

This is a complete magazine base plate replacement and at only 23 grams, it won't weigh you down! Perfect for large hands and tough enough to handle a two story drop. 

What's in the box: 

• 2 MagHooks
• 1 Release Tool

Instructions:

1. Empty magazine of all rounds
2. Flip the magazine upside down
3. Use the release tool provided to press down on the base plate (oblong grey part in center) in the magazine.
4. While holding the base plate depressed using the tool, slide the OEM base plate off SLOWLY while keeping your thumb over the opening.
   1. Not doing this slowly while keeping your thumb over the opening may result in the spring and floor plate in the magazine launching at your face. Not our idea of a good time or experience.
5. After you've slid the OEM base plate off and avoided the spring launching at you. Push the OEM spring and floor plate back into the magazine and keep it depressed below the opening.
6. Take your MagHook, properly orient it to the slots and slide it on until you hear it snap in. 
7. Check for secure fit by trying to remove the MagHook by pushing it back off the magazine slot with some force. You may hear it and see it move back about 1mm, this is normal.