WPZ AR-15 G3S Base Plate (2 Pack)

WPZ G3S Base Plate for MagPul AR-15 Gen 3 Magazines is a complete magazine base plate replacement with a little extra flair. It may not get you a girlfriend, but if you @ us on X, we'll send the signal. 

What's in the box: 

• 2 G3S Base Plates

Instructions:

1. Empty magazine of all rounds
2. Flip the magazine upside down
3. Press down on the base plate (oblong grey part in center) in the magazine.
4. While holding the base plate depressed, slide the OEM base plate off SLOWLY while keeping your thumb over the opening.
   1. Not doing this slowly while keeping your thumb over the opening may result in the spring and floor plate in the magazine launching at your face. Not our idea of a good time or experience.
5. After you've slid the OEM base plate off and avoided the spring launching at you. Push the OEM spring and floor plate back into the magazine and keep it depressed below the opening.
6. Take your G3S, properly orient it to the slots and slide it on until you hear it snap in. 
7. Check for secure fit by trying to move the plate by pushing it back off the magazine slot with some force. You may hear it and see it move back about 1mm, this is normal.